Nathaniel Picard-Busky
  • Home
  • Media
    • Photos >
      • My Guitars
      • Shows
    • Videos
    • Music
  • Improv Lessons
  • Technical Projects
  • Contact

Electronics Technology II: Digital Final Project Week 6

4/9/2015

0 Comments

 
This week, I completed a large chunk of my Arduino code. I have completed the logic that will accept controls from the physical buttons and switches and that which will turn off and on the various on-board indicator lights. Currently, I only have to complete the MIDI interface between the code and the DAW. For this, I simply have to map my DAW controls to MIDI notes and write in these control commands within my code. Before I do this, I am going to have to work more with my user interface in order to ensure that it is intuitive for the user and contains all the control that I outlined in my proposal. This may require mocking up the physical project on my guitar, but I retrieved all of my necessary parts this weekend so this will not be an issue. I was able to source all of my parts from home including the panel-mount indicator LEDs in green and red.

On the following pages is my code as it stands. Code to be inputted is inn double slashes as such: //_____(code)______// while comments are delineated as such // __(comment)_
0 Comments



Leave a Reply.

    Archives

    May 2017
    May 2015
    April 2015
    March 2015
    February 2015
    May 2014
    April 2014
    March 2014
    February 2014

    Categories

    All
    --> Built In Looper
    --> Onboard Light-Controlled Analog Guitar Effects
    --> Small-Format Multi-Effects Pedal

    RSS Feed

  • Home
  • Media
    • Photos >
      • My Guitars
      • Shows
    • Videos
    • Music
  • Improv Lessons
  • Technical Projects
  • Contact